Solar panels for farms in Buxton
The case for solar on a Buxton holding turns on how much of the output the farm uses itself, not on how much the roof makes. What decides a farm scheme here is the state of the roof sheets and the incoming supply, which is why the survey looks at both before anyone sizes an array.
805 kWh per kWp a year at this latitude, so a 500 kWp array models at about 403,000 kWh. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
Book a roof survey in BuxtonIllustrative layout for a unit of this size. Your own figures come from the roof survey.
Agricultural rooftop solar across Derbyshire
What a farm roof near Buxton generates
Modelled irradiation at this latitude is 1025 kWh per square metre a year in the plane of a shallow-pitched roof, which works out at 805 kWh for every kWp installed (EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss). That is about 9 percent below the mean across the areas we cover, so the case here rests on using the output on the holding rather than exporting it.
2 roof mounted schemes are on record nearby. Roof arrays under a megawatt frequently never reach that database at all, so the real number of farm roofs generating around Buxton is higher than the record shows.
Most of the buildings we look at here sit in the SK postcode area.
High Peak is the planning authority for most holdings here, and it is the authority that decides whether an array on an agricultural building falls inside permitted development.
Buxton ranks 8 of 8 towns we cover in Derbyshire on modelled yield, against a national mean of 886 kWh per kWp. The county runs from 805 to 866, a spread of 61 kWh per kWp. On a 500 kWp array that is about 30,500 kWh a year between the strongest and weakest town in the county.
Solar already consented near SK17
From the government's Renewable Energy Planning Database, Q1 2026. These are the schemes on record in this postcode district, which is a fair guide to how the local network has been treating export applications.
| Scheme | Operator | Capacity | Mounting | Status |
|---|---|---|---|---|
| Pennine Aggregates, Waterswallows Lane - Solar Panels | B-Engineering Group | 0.34 MW | Roof | Awaiting Construction |
| Old House Farm, Newhaven - Solar Panels | T H Flower & Sons | 0.19 MW | Roof | Awaiting Construction |
Grid connection through National Grid Electricity Distribution
National Grid Electricity Distribution operates the distribution network across Derbyshire, so the export application goes to them. Anything larger than 3.68 kW per phase falls under G99, which means an application before commissioning rather than a notification afterwards. A constrained network is not the end of a scheme. Capping export costs little when the building already absorbs most of what the roof produces.
Across Derbyshire the planning database records 144 solar schemes totalling 904 MW, of which 27 are operational (REPD Q1 2026).
Send us the postcode
Tell us where the unit is and roughly how big the roof is. We come back with what it can carry, what it would generate against your consumption, and the three ways to pay for it.
Lenzie Consulting Ltd arranges the survey and passes your details to our MCS-certified installation partner so they can quote.
Questions about solar in Buxton
- How much does a farm roof near Buxton generate?
- The model gives 805 kWh for every kWp installed here, so 500 kWp comes out at about 403,000 kWh a year before shading losses. A building of roughly 1,485 sqm of clear roof carries it. Source: EU PVGIS v5.2, SARAH3, 10 degree pitch, 14 percent system loss.
- Will the rural network around Buxton take the export?
- National Grid Electricity Distribution is the distribution network operator for Derbyshire. Anything above 3.68 kW per phase connects under G99, and the application sets the export limit. Rural supplies are often the binding constraint, so we ask the question before an array is sized.
- Is planning permission needed for panels on a farm building near Buxton?
- Usually permitted development covers a roof array. Ground mounted arrays are a different question and are far more likely to need a full application. We put both to High Peak before design sign-off.
- Has anyone near SK17 already done this?
- The planning database records 0 ground mounted and 2 roof mounted solar schemes in this postcode district. That matters less as proof it works and more as evidence of how the local network has treated export applications. Roof arrays under a megawatt often never appear in the database, so the real figure is higher. Source: Renewable Energy Planning Database, Q1 2026.